Rotate metal retainer and push it up through shell and pad 5. Slide the stra ps onto the metal connecter 3.
Loosening up the strap of your childs Extend2Fit car seat is easy.
How to adjust straps on vista toddler seat. Set SwivelLocking SystemBrakes Use loop location above childs shoulder line or sunshade out for SPF WINDOW. From top of seat pull buckle and buckle cover out of shell. How to Loosen the Shoulder Straps on Graco Extend2Fit Child Car Seat.
Detach the grey attachment clip from the current loop. I am trying to adjust these to move them to the lower setting and add in the snug seat. Uppababy vista toddler seat shoulder straps.
Unhook the harness through the gates in the spreader plate and rethread the harness straps through the desired slot height then re-hook the. To adjust the harness straps on the seat pull up on the ladder lock and down on the webbing to loosen the straps. UPPAbaby VISTA Instruction Manual ENGLISH.
Rotate leg rest to one closest to childs shoulder. Pull on the end of the webbing to tighten the straps and pull up on the top loop to loosen. If your child needs more room to fit comfortably within the harness.
To watch a video go here. For manual adjust seats all without the Twist Lift loosen the harness as much as possible this will raise the spreader plate that the ends of the harness attach to up the back of the restraint. Locate buckles metal retainer.
First remove the velcro cover on each strap. Ensure the strap is snug by pulling on the crotch strap. Slide the grey attachment clip onto the new fabric loop.
Pull the straps down to the bottom of the seat to the metal connectors at the back of the booster 2. Under these covers you will find a square metal clip. I have them detached but the strap wont come down enough to fit the lowest setting- Im I doing something wrong.
If you need more length of the strap at the front of the booster seat push the strap lever and at the same time pull the straps. Move the strap fabric to the side to see the break in the clip. Pull out on recline handle and push top of child restraint back.
Congratulation you are almost done loosening up the strap of your child Extend2Fit car seat. Do it need to pull somewhere to release. Our ClickTight convertible car seats include an innovative harness system that allows you to adjust the harness positioning in two places at the childs hip and shoulder levels to provide a custom fit for your child.
Fully recline the child restraint. Reattach clip to the desired harness loop that fits best for your child. It doesnt indicate in the manual.
Decide which slitloop is the proper height for your child use the loop above your childs shoulder line or closet to your childs shoulder line. To adjust the shoulder height position detach the grey adjustment clip from the harness attachment loop. The Ultimate Car Seat Guide.
Reach under the seat between the base and shell and through the recline handle. To tighten pull down on the slip ring. To adjust the shoulder height position detach the grey adjustment clip from the harness attachment loop.
Remove the fabric loop from inside of the slit in the seat fabric. Roll flap and right side of leg rest. To watch a video go here.
Pull on the end of the webbing to tighten the straps and pull up on the top loop to loosen. Reattach clip to the desired harness loop that fits best for your child. Push the straps right through the seat out at the back.
For a tighter fit pinch the webbing and release from back of the slip ring and pull down until snug.